![]() ![]() If needed, you can also find these instructions along with illustrations in the user manual that came with your thermometer. Measurement values stored on the device are still saved when the battery is changed. To do this, open the app and go to the menu > Settings > Thermometer, and follow the steps to pair your thermometer. Place the cover back on the battery compartment and lock it in place.Īfter changing the battery, the thermometer must be paired with the Natural Cycles app again before you are able to continue measuring. Pulling the probe from the well in Recall mode will start a predict cycle. ![]() Remove the old battery and insert a new one (CR2032) with the plus (+) symbol facing up. WARNING: The Welch Allyn SureTemp Plus thermometer consists of high quality. To change the battery, first unlock the battery cover by turning it past the marker to the left, and then lift the cover off. ![]() The thermometer is equipped with a CR2032 lithium battery. At this point, you must insert a new battery before you can take any temperature measurements. You should change the battery if after switching on the thermometer, the “battery flat” indicator appears on the display (an empty battery icon). You will also be able to see the battery of the thermometer in the app under the menu > Settings > Thermometer, where it will be shown if the battery is Full, Sufficient or Low. You will still be able to measure a few more times at this point, but you should have a spare battery ready. If the battery with one bar icon flashes on the display while the thermometer is in use, the battery is low. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |